Automatic Plant Watering Stakes Automatic Plant Watering Devices, Potted Self Watering Stakes Watering Spikes, for Vacation, Garden, Indoor and Outdoor (2 Pack+1Fine Mist Spray Bottle)

Let Your Plants Look After Themselves! Instructions 1. Fill a bowl with water. Remove the top of the blumat. Put both the into the bowl for at least 15 minutes. 2. Holding the cone and cap underwater, knock out the air bubbles and press the top on tightly. 3. Push the ceramic cone into the soil. 4. Put the hose at the bottom of the container of water. Thats it! Silicone tube reaches about 38 inches. Click Add to Cart now and solve all of your plant watering problems. Our mission is to create desirable products that enhance everyday life and that stay true to our philosophy of creating Brilliantly Useful Design. WATERING VOLUME CONTROL Tips you should know The watering volume can be controlled by the level of the water. Once the soil is moistened enough, the watering stake will cease flowing water, once the soil dried the device will start work again. After months of using, the ceramic piece parts need to be cleaned so as not to affect the effect of continue-using. If the water spike fails to water your plants, please repeat the above operation steps. As the soil dries, the ceramic cone delivers water gradually into the surrounding earth;Thereby create a vacuum within the cone which draws water from the nearby container of water; Soil, looseness, water absorption, water level of the watering device will directly affect the speed of watering The higher the water level of the Water storage vessel, the faster the water seepage.So you need to adjust to the right state to avoid water shortage in the plants or too much water.